CARTS, PARTS AND ACCESSORIES

CART MODELS

Model 1311200 Inhalator Cart

The standard for clinics, homecare, and concentrator back-up. Complete kit comes with adjustable flow regulator, 2 to 15 lpm, chrome cart, cylinder wrench, disposable mask, and “E” cylinder.

Model 1311700FC Emergency Cart

Combination resuscitator and adjustable flow inhalator with the extra capacity of an “E” cylinder. Comes with demand valve and mask, inhalator mask, cylinder wrench, and “E” cylinder. Aspirator is optional.

Model 1311800FCA Dual Cylinder Emergency Cart

The deluxe high volume model. Specially designed cart and regulator allow both cylinders to be connected at once. The kit includes a demand valve, flow control valve, aspirator, resuscitator mask, inhalator mask, small and large airways, cylinder wrench, special dual cart, regulator, and two “E” cylinders.

CARTS

Model 11201C - Single “D” or “E” cylinder cart, chrome-plated

Can be hung from hospital bed or wheel chair. Order model 11201 for green enamel.

Model 11801 – Dual cylinder “D” or “E” cart.

Comes in green enamel only.

Model 11802C – Special dual cylinder cart.

To accommodate 10825 regulator.

PARTS & ACCESSORIES

Model 10009 Transfiller - CGA870 Yoke to CGA540 Connection with gauge

Model 10010 Transfiller - CGA870 Yoke to CGA540, no gauge

Model 10012 Pigtail - CGA540 Stainless Steel Flexhose for cascade system

Model 10017 Transfiller - CGA870 Yoke, CGA540, gauge, flexhose, 30"

Model 10020 Coupler Tee - 2 male CGA540, one female CGA540 for cascade system

Model 10013 Yoke Adapter - CGA870 Yoke with CGA540 male thread

Model 10014 Yoke - Standard CGA870 Yoke, 1/4 NPT thread

Model 10015 Tester - For large cylinders, CGA540

Model 10016 Tester - For small cylinders, CGA870

Model 10011 Cylinder Washer - For Yoke (not pictured)

Model 10440 Aspirator - Comes with five feet of hose with quick connect for UOE systems or DISS nut for others. Suction can be reversed to clear catheter or partially empty jar. Replacement catheter, no. 10441. Replacement jar, no. 10443

Model 10510 Demand Valve - Provides 100% oxygen and positive pressure for resuscitation. Takes the place of mouth-to-mouth. Also supplies 100% oxygen on demand - just take a breath - for inhalation. Attach to 40 to 90 psi preset regulator. Comes with five foot hose with DISS fitting.

Model 10514 Demand Valve - With lever.

Model 10510PV Flynn Valve - The Flynn or paravent (PV) valve provides 100 % oxygen for resuscitation but has a child and adult setting. Does not have demand mode but can be used as constant flow inhalator with low, medium and high flow settings.

Model 10505 Mask - Resuscitator, adult

Model 10506 Mask - Resuscitator, child

Model 10507 Mask - Cuffed, adult

Model 10508 Mask - Cuffed, child (not pictured)

Model 10077 Supercross - Multiple outlet inhalator. Each outlet delivers approximately 6 liters per minute. Plug mask with special fitting into quick connect, using only as many as you need. Kit includes masks, fittings, carrying case and 20 foot hose. Use 50 psa regulator, such as our model 10575, a large cylinder.

Model 10585 Contents Gauge – 3000 psi, Bottom Mount, 1 ½” (not pictured)

Model 10586 Contents Gauge – 4000 psi, Bottom Mount, 1 ½”

Model 10587 Contents Gauge – 4000 PSI, Rear Entry, 1 ½”

Model 10591 LPM Gauge – 2-15 lpm, Bottom Mount, 1 ½”

Model 10592 LPM Gauge – 2-15 lpm, Rear Entry, 1 ½”

Model 10607 Restrictor – Preset for UOE Quick Connect

Model 10706 Flow Control Valve – Off to 15 lpm

Model 10711 Flowmeter – ½ -15 lpm Thorpe tube.

Model 11202 Cylinder Wrench – Plastic for “D” or “E” cylinder

Model 11207 Handwheel with Chain – for “D” or “E” cylinder

Model 11610 Cylinder Stand – Fiberglass, for "D" or "E" cylinder

Model 12201 Wall Mount – for all green case models

Model 12251 Cylinder Bracket – for “D” or “E” cylinder

DISPOSABLES

Model 13008 Nut & Nipple – Green plastic, swivel (not pictured)

Model 10450 Airway Kit - #1 through #6 in plastic case

Model 10451-10456 Airway – Individual airways, #1 thru #6

Model 10457 Bite Stick – Plastic

Model 64007 – High concentration mask with bag and tubing

Model 64041 – Medium concentration mask with tubing

Model 64204 – Cannula with tubing

Model 64200 – Oxygen tubing – 7 foot

Model 64223 – Oxygen tubing – 20 foot

Model 64375 – Humidifier, DISS fitting

AMBULANCE ACCESSORIES

Model 13055 – Ohio Adapter with male DISS fitting

Model 13056 – Ohio Adapter with 1/8 NPT, male

Model 10750 – Flowmeter with Ohio Adapter

Model 10752 – Flow Control Valve with Ohio Adapter

Model 10753 – Demand Valve with Ohio Adapter

Model 10760 Kit – Special adapter set allows switching from portable demand valve unit to Ohio wall socket.

Model 10575 Regulator – For large cylinder with DISS outlet